4
is significant vibration or other defects are detected. If this condition occurs, check
the machine to determine the cause.
•
Check that the workpiece is properly supported.
•
The machine continues to rotate after the tool is turned off.
•
Inspect the grinding wheel before use, do not use chipped, cracked or defective
products
Other risks
Even when the power tool is used as prescribed, it is not possible to eliminate all residual
risk factors:
a. Health defects resulting from vibration emission if the power tool is used for a
longer period of time or if it is not managed and maintained properly.
b. Injuries and property damage due to broken fixtures breaking suddenly.
Caution
This power tool produces an electromagnetic field during operation.
This field can, in some circumstances, interfere with active or passive
medical implants.
To reduce the risk of serious injury, we recommend that persons with
medical implants consult their physician before using this power tool.
If the cable is damaged or cut during work, do not touch the cable,
immediately unplug the tool. Never use the machine with a damaged
cable. The machine must not be damp and must not be used in a humid
environment.
Attention
Safe operation of this machine is only possible when the operating or safety information
is fully read and the instructions contained therein are strictly followed.
Technical data
Grinder data sheet
Voltage
220-240V
Frequency
50/60Hz
Power
130W
No load speed
10000-32000/min
Chuck diameter
3.2mm
It includes
1 flex shaft
100 accessories
1 set of brushes
1 briefcase
