6
Product description
1. Replacement chuck
2. Chuck
3. Protective dust cap
4. Locking handle
5. Auxiliary handle
6. Unlock button
7. Mode selection switch 1
8. Mode select switch 2
9. ON / OFF switch
Note: The machine is designed for drilling in concrete, brick and stone. It is equally suitable for
drilling in wood, metal, ceramic and plastic.
Note 2: Not all accessories illustrated or described do not have to be included in the standard
delivery.
Set up
Before using
Be careful of hidden power lines or gas and water pipes. Check the work area
with devices such as metal detectors.
Always use the correct supply voltage. The voltage of the power supply must match the
value indicated on the nameplate of the machine.
Bit change
Take care that the dust cap is not damaged when changing bits.
Insert drill bits
•
Clean and lightly the tool before inserting them.
•
Insert the dust-free bit into the chuck by turning until it clicks.
•
The bit locks itself. Check the lock by pulling it.
