Application
This hammer should be applied to breaking concrete, chipping off concrete, grooving, bar cutting,
and driving piles in installation of piping and wiring, unitary facility installation, machinery installation
water supply, and drainage work, interior jobs, harbor facilities and other civil engineering work etc..
Machine Type
TH220502
AC220-240V~
AC110-120V~
Voltage
/60Hz
0
5
Frequency
2200W
2200W
Input power
950/min
75J
75J
950/min
Impact rate
Impact force
Weight
30kgs
Sound pressure values (in
accordance with 2000/14/EC)
105.38dB(A)
Guaranteed Sound power values
(in accordance with 2000/14/EC)
110dB(A)
UTH220502
60Hz
30kgs
105.38dB(A)
110dB(A)
Note: Noise and vibration values are determined acc. to EN 60745-1 and EN 60745-2-6.
Note: The declared vibration value has been measured in accordance with a standard test method and
may be used for comparing one power tool with another.
The declared vibration value may also be used to evaluate the exposure for the user caused by vibration
in advance.
Warning! Depending on the actual use of the power tool the vibration values can differ from
the declared total.
Adopt proper measures to protect yourself against vibration exposures. Take the whole work
process including times the power tool is running under no load or switched off into
consideration.
Proper measures include among others regular maintenance and care of the power tool and
application tools, keeping hands warm, periodical breaks and proper planning of work
processes.
Standard accessories
Hexagon bar wrench 12mm(for M14)
1 piece
Hexagon bar wrench 8mm(for M10)
1 piece
Hexagon bar wrench 6mm(for M8)
1 piece
Hexagon bar wrench 5mm(for M6)
1 piece
Oil tank cover wrench
1 piece
One bottle of grease
60g (one bottle)
point chisel(28*530mm)
1 piece
flat chisel(28*530mm)
1 piece
Carbon brush(7*17*18mm)
1 couple
1.
Technical specifications
2
