Total TH308266, Quick Start Manual

Hammer Safety Warnings

Wear ear protectors. 

Exposure to noise can cause hear-

ing loss.

Use auxiliary handle(s), if  supplied with the tool. 

Loss of control can cause personal injury.

Hold the tool by the insulated gripping surfaces when 

performing operations where the application tool or 

the screw could contact hidden wiring or its own power 

cord. 

Contact with a “live” wire  will also make exposed 

metal parts of the power tool  “live” and shock the operator.

Use suitable detectors to determine if utility lines are 

hidden in the work area or 

call the local utility company 

for assistance. 

Contact with electric lines can lead to fire 

and electric shock. Damaging a gas line can lead to explo-

sion. Penetrating a water line  causes property damage or 

may cause an electric shock.

When working with the machine, always hold it firmly 

with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.

Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

Always wait until the machine has come to a complete 

stop before placing it down. 

The tool insert can jam and 

lead to loss of control over the power tool.

Product Description and 

Specifications

Read all safety warnings and all instruc-

tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 

and/or serious injury.

Intended Use

The machine is intended for  hammer drilling in concrete, 

brick and stone, as well as for light chiselling work. It is also 

suitable for drilling without impact in wood, metal, ceramic 

and plastic. Machines with electronic control and right/left ro-

tation are also suitable for screwdriving.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 Tool holder
2 Dust protection cap
3 Locking sleeve
4 Rotational direction switch
5 Lock-on button for On/Off switch
6 On/Off switch
7 Release button for mode selector switch 

8 Mode selector switch
9 Button for depth stop adjustment

10 Depth stop
11 Auxiliary handle

12 Handle

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories 

can be found in our accessories program.

Technical Data

Rated voltage:         

220-240V~50/60Hz

Rated power input:  

No-load speed:        

Impact times:          

Drilling capacity:

           Concrete:     

                 Steel:     
                Wood:     

TH308266

UTH308266

TH308266-6 TH308266-8 TH308266S

Model No.

Model No.

(ISRSEL Plug) (BS Plug)

(SAA Plug)

Rated voltage:         110-120V~60Hz

Rated power input:  800W

No-load speed:        0-1200/min

Impact times:           0-5300/min

Drilling capacity:

           Concrete:     1˝

                 Steel:     1/2˝

                Wood:     1-3/16˝

800W

0-1200/min

 0-5300/min

26mm

13mm
30mm

6