6
Product description
1. ON/OFF switch
2. Air intake
3. Trigger
4. Flow regulator
5. Tank/Vessel
6. Spray head
7. Mouthpiece
8. Union nut
Note: Not all accessories illustrated or described need to
be included in the standard delivery.
The airflow generated by the motor fan flows into the paint gun. The air flow serves to
atomize the coating material at the nozzle and to pressurize the container.
This pressure promotes the coating material through the riser tube to the nozzle. Air
pressure and flow are adjustable.
Set up
L
ining materials
Coating materials are solvent- and water-based paints, finishes, primers, two-component
paints, varnishes, automotive finishes, stains, and wood preservatives.
Preparation of the investment material
Before spraying, it may be necessary to thin the material being used with the appropriate
thinner as specified by the material manufacturer. Never exceed the dilution advice given
by the manufacturer.
Viscosity
Viscosity = thickness of liquid coating material
•
Shake spray material well before measuring viscosity.
•
Immerse the viscosity cup completely in the spray
material.
•
Then hold the viscosity cup up and measure the time in
seconds until the liquid is emptied. This time is known as
the completion time.
Summary of Contents for TSGLI2001
Page 1: ...1 v BATTERY POWERED PAINT GUN...
Page 12: ...12 BATTERY POWERED PAINT GUN...