Pulley Locator Clamps
21
Pulley Locator Clamps
The pulley locator clamps are designed to adjust easily.
1. With one or two hands, squeeze the back of the clamp toward the pulley.
2. Move the pulley locator clamp to the desired position on the LAT bar and
center the hole in the clamp over the pulley locator nodule on the back of
the LAT bar.
3. Let go of the clamp and its internal spring will close around the LAT bar. It
will tighten more as you load it while exercising.
Dynamic Arm Pulley Position Adjustment
Automatic Rail Locks
A rail lock mechanism will automatically engage at high inclines to “lock” the
hinge for plyometrics and it will automatically disengage at low inclines for
folding. There is a spring-loaded lever on each hinge that is pushed by a rod
on the plyostrut to unlock the hinges for folding the rails. Keep all items clear
of the mechanism and do not use the Total Gym if it is not working properly.
Step 1: Unlock
Step 2: Move
Step 3: Release
Rail Lock
Summary of Contents for GTS
Page 3: ...Owner s Guide 1 OWNER S GUIDE PowerTower GTS Sport ...
Page 34: ...32 ...