Press the
MODE
button repeatedly until the
COOL
icon appears on the display. Press the Up
or Down buttons until the set temperature is 10
degrees below room temperature. The air
conditioner should turn on.
NOTE:
Most
equipment has a time delay of 5 minutes between
cool cycles. This feature is defeatable on the
thermostat. Consult the Owner's Manual under
Setup, cycles per hour.
Turn the power on to the Heating/Air Conditioning
system.
Press the
MODE
button repeatedly until the
HEAT
icon appears on the display. Press the
Up or Down buttons until the set temperature is
10 degrees above room temperature. The
furnace should turn on.
TOTALINE
Page 5.1
SECTION 5
Test Operation
Test Operation
Press the UP button until the setpoint is equal to
the room temperature. Press the
FAN
button to
Fan On
. The fan should turn on and run
continuously.
5
Summary of Contents for P374-1 700
Page 3: ......