TST-EGND06413SCS01:
TST-EGND06423SCS01:
2-pipe
4-pipe
Installation
Thermostat Location
Thermostat should be mounted:
• Approximately 5 ft (1.5m) from floor.
• Close to or in a frequently used room, preferably on an inside
partitioning wall.
• On a section of wall without pipes or duct work.
1.
Cut off the power, the mark of wire should be clear.
2. Take the main control panel
apart.
3.Push up by force, open the
clip.
4. As per wiring drawing,
connect with terminals, fix it by
crewdriver.
5. Fix by the two screws in the
packing box.
6. Push the downside by force,
lock the up panel, and finish the
installation.
Thermostat
Fan coil
L(R)
Val2
Val1
Low
Med
Hi
N(C)
S1
S2
OUTDOOR SENSOR
CONNECTION
L(R)
Val
Low
Med
Hi
N(C)
Thermostat
Fan coil
L(R)
Val2
Val1
Low
Med
Hi
N(C)
S1
S2
OUTDOOR SENSOR
CONNECTION
L(R)
Heating Val
Cooling Val
Low
Med
Hi
N(C)
