6
7
Installing the arc Nano Tank:
To install the arc Nano Tank, simply insert the filled e-liquid tank
into the opening at the top of the battery – ensuring that the
brass connector is securely attached to the bottom of the tank
– and the tank will be secured to the battery magnetically.
Note: Please retain the brass connector for further use on
replacement tanks.
Note: The arc Nano Tank is a semi-disposable unit and can be
filled a number of times until the atomizer performance drops
after which a replacement tank will be required. The atomizer
itself cannot be replaced within the tank and a new complete
tank is required.
Using your arc nano
Atomizer Protection:
If the power button is pressed for
longer than 10 seconds, the device
will stop firing and the blue LED will
flash twice.
Short-circuit Protection:
Should a short-circuit occur, the blue
LED will light on for 3 seconds before
going off and the device will stop
operating until the tank is replaced.
Resistance Detecting:
When the resistance of the atomizer
is lower than 1.2ohm, the device will
not operate.
Low-voltage Protection:
When the voltage of the device drops
below 3.3V, the blue button light will
flash 10 times and the output will cut
off automatically. Charge the device to
reactivate it.
Using your arc nano
Arc_Nano_Manual.indd 6-7
25/05/2016 08:32
