10
Using your arc pico kit
Shift between VW/Bypass/VT-Ni/
VT-Ti/VT-SS/TCR Modes:
When powered on, quickly press the
power button 3 times consecutively,
the active mode will be displayed
on the screen. Use the adjustment
buttons to cycle through the VW/
Bypass/VT-Ni/VT-Ti/VT-SS/TCR-M1/
TCR-M2/TCR-M3 modes. Press the
power button to select the mode
which is currently displayed, or
alternatively, wait 10 seconds with
the mode of choice displayed on
the screen.
VW Mode:
When in VW mode, use the + or
- adjustment buttons to decrease
or increase the level of wattage
respectively. The available wattage
range is 1W – 75W.
Bypass Mode:
When in bypass mode there is a
direct voltage output dependent
on battery voltage and atomizer
resistance.
