18
19
POWERING ON AND OFF
Press the power button 5 times in quick
succession to turn the Intu Pro on. To turn the
device off again, press the power button 5
times quickly.
SETTING THE WATTAGE
The Intu Pro has adjustable wattage that can
be set from 1 - 80W. Use the adjustment
buttons on the battery to increase or
decrease the wattage.
Tip:
Press and hold down either of the
adjustment buttons to make speedy changes
to the wattage.
VAPING
Press the power button and inhale on the
Intu Pro mouthpiece, the device will begin to
produce vapour.
E-LIQUID LEVEL
To prevent the atomizer head from becoming
dry and burning prematurely, ensure the
e-liquid level does not drop below the cotton
inlets on the atomizer head, visible through
the glass section of the tank.
CHARGING THE BATTERY
To charge the battery, connect the charge
port on the battery to a USB port or suitable
wall adaptor with the supplied charging cable.
The screen will display an animated battery
icon while charging, along with the charging
progress displayed as a %.
REPLACING THE ATOMIZER HEAD
Remove the tank from the Intu Pro battery
by unscrewing at the tank base. Turn the tank
upside down, then turn the tank base through
120 degrees (1/3 turn) anti-clockwise to
release it from the main tank body. Remove
the atomizer head from the tank by pulling,
and insert a new atomizer head. Before fitting
a new atomizer head, remember that it will
need priming as described in the section
“Priming The Atomizer Head”.
Reminder:
After priming a new atomizer head
it is recommended to wait 5 minutes before
vaping to ensure the atomizer head is fully
saturated.
USING YOUR INTU PRO
TW_INTU-PRO_manual.indd 18-19
TW_INTU-PRO_manual.indd 18-19
13/09/2021 13:02
13/09/2021 13:02
