Totally Wicked Odyssey, User Manual

26

27

Problem

Symptom

Solution

Switch fails to connect. No vapour on switch 

activation.

Clean brass screw head at base 
of battery compartment.  Ensure 
battery contacts are clean.

Stiff lock.

Switch will not rotate to lock 
(or occasionally unlock).

Occasionally this is due to ingress 
of dirt, but more normally just the 
O-ring in the lock mechanism is 
too cold.  Holding the end of the 
Odyssey in your hand gener-
ally provides enough warmth for 
normal function to return.

Flooding of central 
cartomizer cavity.

Low vapour production, 
spitting, hot liquid expelled 
through mouthpiece.

Clean atomiser connector on top 
of Upper Odyssey body.  Ensure 
well charged battery is fitted.  
Ensure there is enough fluid in 
tank to cover both small cart-
omizer holes.  If problem persists 
replace tank ‘O’ rings.

Problem

Symptom

Solution

Low battery voltage.

Decreased vapour  
production.

Fit fully charged battery.

Loose lock / switch.

Switch travel increases, lock 
fails to click on rotation.

Tighten brass screw at base 
of battery compartment.  The 
screw is factory tightened 
with Loctite™ 243 thread-
locking adhesive.

Battery life.

Decreased vaping time or 
early performance drop-off 
after a full charge.

Replace battery.

Cartomizer life.

Decreased vapour 
production, reduced air-flow 
on inhalation.

Replace cartomizer.

Burnt cartomizer

Burnt taste, poor vapour 
production, does not 
improve with further use.

Replace cartomizer, taking 
extra care to ensure effective 
priming.

Troubleshooting