9
TCR Mode (M1/M2/M3):
When in TCR mode, use the up or down
adjustment buttons to increase or decrease
the temperature respectively. The available
temperature range is 100-315̊C or 200-600̊F and
can be adjusted in increments of 5̊C and 10̊F.
To adjust the wattage level whilst in TCR mode,
press the power button 3 times consecutively
to activate the menu, press the left adjustment
button twice, the wattage symbol will flash. Use
the right adjustment button to adjust the wattage
level.
Configuring TCR Mode:
To set the temperature coefficient of resistance
to match a particular coil, when the device is
powered off simultaneously hold the power
button and the right adjustment button to enter
the TCR configuration menu.
Use the power button to select which to configure
from M1, M2 and M3 – this feature allows the
TCR values for 3 materials to be stored to the
device. Use the right and left adjustment buttons
to increase or decrease the value to your
preference, leave the device for 5 seconds to
confirm the selection.
Using your V-Pipe Kit
TW_V-Pipe_Manual.indd 9
30/11/2016 15:10