XSDC 601-01
1.6 Intended use
The device is exclusively intended to cool atmospheric air. Any deviating or exceeding deployment is
considered unintended use. Totech EU will not assume any liabilities for damage resulting therefrom.
The device must not be mounted in and/or exposed to the intake of liquids (e.g. filled
tanks or sumps, flooded areas etc.).
Operation in and/or with potentially explosive ambiance is not permissible.
Intended use also includes compliance with all information provided in the Operation Manual as well
as adherence to the remarks made on.
1.7 Hazards related to cabinet handling
The device was built in accordance with state-of-the-art technology and generally accepted technical
safety requirements. Ensure to exclusively use it:
✓
for its intended use;
✓
in good order and condition with respect to safety.
✓
Ensure to immediately remedy any malfunction, which might impede the device’s safety.
1.8 Protective devices
✓
Generally ensure all protective devices to be properly installed and functional before operating
the device.
✓
Protective devices may only be removed:
a) After shutdown
b) As safeguarding against unintended restart.
✓
For delivery of subcomponents, the operator shall ensure the standard installation of
protective devices.
1.9 Electrical hazards
✓
Works performed at the electrical power supply are to be executed by qualified electricians
only.
✓
Ensure to always keep the control area locked. Access is to be granted to authorized and
adequately equipped personnel only.
✓
In the event works are to be performed at live parts, ensure to provide for a second person
who can switch off electricity, if necessary.
1.10 Hazards arising from hot surfaces
✓
Defrosting cycles process may cause the cooling module surface to heat up to approx. 40°C.
✓
Ensure not to touch the operating cooling module without wearing adequate protective
equipment.
✓
Ensure to keep a minimum distance of 5 cm at the unit's back side.
