6
totemacoustic.com
15- Damage requiring service: unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
k
if the power supply cord or plug is damaged.
k
if liquid has been spilled or objects have fallen into the product.
k
if the product has been exposed to rain or water.
k
if the product does not operate normally by following operating instructions as an
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to its normal operation.
k
if the product has been dropped or damaged in any way.
k
if the product exhibits a distinct change in performance despite verifying that all system
connections are correct.
Replacement parts:
If replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part unauthorized
substitutions may result in fire, electric shock, or other hazards.
Caution
To prevent electrical shock do not use the electrical plug of your Totem Subwoofer with an extension
cord, receptacle or other outlet unless the blades can be fully inserted to prevent exposure.
To protect against the risk of electrical shock, do not attempt to remove the amplifier from the
Totem subwoofer and do not use near bathtubs, sinks, swimming pools, saunas, in wet basements,
near other water sources, or rain. If service is required, please refer to your authorized Totem dealer.
The lightning flash with the arrowhead symbol, within the equilateral triangle, is intended to alert the
user of the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock to individuals.
The exclamation point within an equilateral triangle is intended to alert the user of the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the product.
Warning
All connections must be made before the Totem subwoofer is turned on.
use the GAIn dial and or switch to match the loudness of the subwoofer to main speakers. Generally, the
final position is set between 9 and 12 o’clock. For optimum performance it is recommended that you do
not turn the unit too loud during a break-in period of about 95 hours.
use the PHASE dial and or switch to adjust the phase of the Totem subwoofer to your main speakers.
When in phase the system will give a much fuller bass response. If your main speakers become brighter
then usual it means the system is out of phase and needs readjusting. The simplest way to adjust the
phase of your system is to have a second individual to vary the PHASE dial and or switch as you are sitting
in the listening positioning.
