Totem Mini Lab, Assembly And Short User Manual

PRECAUTIONS:
ELECTRONICALLY OPERATED PRODUCT

Safety warnings:

Electronics protection:

Disclaimer

• 

Never connect the Mini Lab to a different power supply, use only the included power supply.

• 

Place the power cord so you cannot stumble on it or step on it, or otherwise expose it to any potential damage. Also, make sure that the power 
cord is not mechanically or otherwise damaged. If so, stop using the damaged power cord immediately, and replace it.

• 

Do not expose this product to water or moisture, and do not place it on a conductive surface whilst in operation. 

• 

Do not expose this product to heat from any source; it is designed for reliable operation at normal room temperatures. 

• 

The device is for indoor use only.

• 

Do not expose board to high intensity light sources (e.g. xenon fl ash or laser) 

• 

Operate this product in a well-ventilated environment, and do not cover it during use. 

• 

Place this product on a stable, fl at, non-conductive surface while in use, and do not let it contact conductive items. 

• 

Take care while handling this product to avoid mechanical or electrical damage to the printed circuit board and connectors. 

• 

Avoid handling this product while it is powered. Only handle by the edges to minimize the risk of electrostatic discharge damage. 

WARNING: Make sure to protect the electronics against electrostatic discharge (ESD). Always unpack the electronics right before you need them!
Here are some tips to prevent damage to the electronics:
• 

Keep the electronics inside the ESD bag right until you are asked to install them.

• 

Always touch the sides of the board while manipulating with it. Avoid touching the chips, capacitors and other parts of the electronics.

• 

Before you touch the electronics use any conductive (steel) structure nearby to discharge yourself.

• 

Be extra cautious in the rooms with carpets, which are a source of electrostatic energy.

• 

Clothes from wool and certain synthetic fabrics can easily gather static electricity. It is safer to wear cotton clothing.

This product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from 
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, 
please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for 
environmentally safe recycling.    

Failure to read the handbook may lead to personal injury, inferior results, or damage to the Totem Mini Lab. We cannot control the conditions in which 
you assemble the Totem Mini Lab. For this, and other reasons, we do not assume responsibility, and expressly disclaim liability for loss, injuries, damage, 
or expense arising out of, or in any way connected with, the assembly, handling, storage, use or disposal of the product.

Due to the continuous product improvement, the pictures on this manual may differ slightly from the actual product. Please adhere to actual product 
instead.