Toto NEOREST AC SN996MX CWT996CEMFX, Instruction Manual

32

33

Deodorizing Filter 

(Approximately once a month)

1

Unplug the power plug.

2

Remove the 
deodorizing 

fi

 lter.



Use the notch of the 
deodorizing 

fi

 lter to pull it 

out.



Do not pull with undue 
force. 
(May cause damage or 
malfunction.)

Notch

Deodorizing Filter

3

Clean with a tool such as a toothbrush.



When washing with 
water, dry off all water 
before mounting.

Toothbrush, 
etc.

4

Mount the 
deodorizing 

fi

 lter.



Push 

fi

 rmly until a click 

sound is heard.

5

Insert the power plug.

Maintenance

Bowl Unit

3

Wand 

(Approximately once a month)

<If you notice dirt (Wand cleaning)>

Soft cloth soaked in water

Toilet paper, etc. 

(May cause damage.)

1

Extend the wand.



Operate with the buttons on the back 
side of the remote control.

(1)

 Press [MENU].

(2)

Use 

 to select 

[MANUAL CLEANING].

Press [

●

ENTER].

(3)

Use 

 to select 

[WAND CLEANING 
ON/OFF].

Press [

●

ENTER].



The wand extends and water sprays 
out for cleaning.



The wand automatically retracts after 
about 5 minutes.

2

Wipe with a soft, wet cloth.



Do not pull, push or press the wand 
with excessive force.
(May cause damage or malfunction.)

3

Press the 

 [STOP] 

button on the front side of 
the remote control.



The wand retracts.

When the toilet bowl repels water or tends to get dirty

(SN996MX only)

●

The toilet bowl surface needs to be cleaned.

➞

Clean with a toilet brush or the like using commercially available hydrochloric acid-based or inorganic 
acidbased detergent.



For daily cleaning, use neutral detergent.

●

Caution with use of detergent (Page 31)

Bowl Unit 

(Approximately daily)





Toilet brush





Neutral toilet detergent





Strongly acidic cleaners or 
strong alkaline cleaners





Cleaners containing abrasive 
compounds





Fluoride-based detergent 
(containing hydrogen 

fl

 uoride 

or ammonium 

fl

 uoride)





Wire brush





Abrasive nylon scrubbing brush

1

Unplug the power plug.

2

Clean with a toilet brush or a similar tool.

■

If the bowl unit is clogged



Using plunger or similar, provide 10 cm (0.33 ft) or more clearance between the top of the bowl unit and the 
water surface. Use commercially available tools that are made for unclogging the bowl unit.
(May cause over

fl

 ow of dirty water and water damage.)

Vinyl sheet, etc.

Keep 10 cm (0.33 ft) or more

■

If the 

fl

 oor is dirty



Clean it with a well wrung cloth. (Not cleaning the 

fl

 oor may cause stains or corrosion.)



Sitting is recommended to reduce splashing caused by standing and urinating.

3

Insert the power plug.

Deodorizing Filter / Wand

Wand

Deodorizing Filter

Maintenance