42
GB
Automatic
À
ushing
Setting automatic
À
ushing
Default setting:
ON
Back of the remote control
FLUSH button
1
1
Press
.
Back of the remote control
Each time you press the setting changes
between ON and OFF.
To make the toilet
À
ush automatically:
Make the "
Ɣ
" appear in the display section
on the back of the remote control.
To make the toilet not
À
ush automatically:
Make the "
Ɣ
" disappear in the display
section on the back of the remote control.
This completes the change to the
settings.
Ɣ
Automatic
À
ushing
Setting the delay until the
automatic
À
ushing starts
The delay before automatic
À
ushing can be set to
about 5 seconds (when the seat is used) or about 10
seconds.
Default setting:
about 5 seconds
STOP button
POSITION button
1
1
Press
for at least 10
seconds.
Hold the button down until the whole remote
control display blinks.
Back of the remote control
Check
All the indicators on the remote control display
section blink
2
2
Press
"
Ÿ
".
Each time you press the setting changes
between ON and OFF.
To make the delay about 5 seconds:
Press the button until you hear a long beep.
To make the delay about 10 seconds:
Press the button until you hear a short beep.
3
3
Press
again.
This completes the change to the
settings.
Ɣ
Ɣ
43
Settings
GB
Water pressure and washing
position
Making the unit remember
the last water pressure and
washing position settings
The unit can be set to remember the last water
pressure and washing positions used.
STOP button
REAR(Soft) button
1
1
Press
for at least 10
seconds.
Hold the button down until the whole remote
control display blinks.
Back of the remote control
Check
All the indicators on the remote control display
section blink
2
2
Press
for at least 5 seconds.
3
3
Press
again.
This completes the change to the
settings.
To restore the previous settings, repeat the above
procedures.
Ɣ
Ɣ
Summary of Contents for NEOREST SE
Page 1: ......
