15
Operation
2
2
Press the temperature adjustment
button repeatedly until the
temperature reaches the desired level.
Each time you press the temperature
adjustment button, the temperature
adjustment lamp is switched.
Tip
2
The setting is complete.
Setting the water heater and seat heater to “OFF”
1
1
Press the temperature adjustment
button on the Washlet main
operation unit.
Press either
or
button to make the
setting to “OFF”.
The temperature adjustment lamp
indicates the current temperature level.
2
2
Press the temperature adjustment
button repeatedly until the temperature
adjustment lamp goes out.
3
Tip
The setting is complete.
To set the heaters to “ON” again, press either
or
button to make the setting to “ON” and light up
the temperature adjustment lamp.
Tip
4
Tip
2
The temperature adjustment lamp goes out when you release your nger from the temperature adjustment
button for about 10 seconds. If the lamp goes out during temperature adjustment, press the button again
and set the temperature to the desired level.
Tip
3
When the temperature adjustment lamp goes out, the indication lamps goes out at the same time.
Tip
4
When the temperature adjustment lamp lights up, the indication lamps of the current temperature setting
lights up at the same time.
The temperature level is
switched as below.
OFF
High
Medium
Low
Example: To turn “OFF”
the toilet seat heater
Lights up.
Goes out.
Goes out.
K837(Euro)InstructionManual̲EN.indb 15
2011/03/15 10:53:19