23
Cleaning
Cleaning the clearance between the main Washlet unit and the toilet
About once a month, remove the main Washlet unit to clean the top of the toilet and the bottom of
the main Washlet unit.
1
1
For Continental Europe
Disconnect the mains plug.
¿
For your safety, disconnect the mains plug before
removing the main Washlet unit. In addition, avoid
splashing water on the disconnected mains plug.
For United Kingdom
Turn off the breaker on the distribution board.
¿
For your safety, turn off the breaker on the distribution board before detaching the main Washlet unit.
2
2
Dismount the main Washlet unit.
While pressing the Washlet release button on the right
side, pull the main Washlet unit forward.
¿
When the main Washlet unit is detached, do not
turn it over or tip it at a great angle.
¿
Do not pull the unit with a lot of force because the
water supply hose and power cord are attached to
it.
3
3
Clean the unit.
To clean these parts, follow the instructions in “Daily cleaning” on page 21.
4
4
Reattach the main Washlet unit.
(1) Align the centre of the main Washlet unit and
the centre of the base plate.
(2) Slide the main Washlet unit over the top of the
toilet to cover the base plate completely, until
you hear a click.
¿
Pay attention not to pinch the power cord.
For United Kingdom
Base plate
5
5
For Continental Europe
Reconnect the mains plug.
For United Kingdom
Turn on the breaker on the distribution board.
Base plate
While pressing the release
button, pull the main
Washlet unit forward.
While pressing the release
button, pull the main
Washlet unit forward.
Washlet release button
K837(Euro)InstructionManual̲EN.indb 23
2011/03/15 10:53:23