25
Cleaning
Cleaning the drain valve with lter
Clean the drain valve with lter if the water pressure during rear or front washing seems to have
weakened.
1
1
Close the stop valve and stop
the cold water supply.
2
2
Drain the water from the Washlet
pipes.
(1) Press the
button on the Washlet main operation
unit to make the wand come out.
(Pressure is released from the water supply pipe.)
(2) Press the
button again.
(The wand returns to its retracted position.)
3
3
Detach the drain valve with lter.
Use a at-blade screwdriver to loosen the drain valve
with lter, and pull it out.
CAUTION
Prohibited
Do not detach the drain valve with
lter while the water stop valve is
still open.
Doing so will cause water to spill.
4
4
Clean the lter.
Wash off and remove debris caught in the lter of the drain valve with lter.
1
Tip
¿
Thoroughly remove the debris on the lter with a toothbrush or
similar tool.
¿
Use a cotton swab or similar to remove debris from inside the
attachment hole for the drain valve with lter.
Tip
1
Cleaning the drain valve with lter
Do not use detergent. Wash with plain water.
Do not break the lter nor detach it from the drain valve.
For wall-mounted toilet
For oor-mounted toilet
Stop valve
Stop valve
Turn clockwise.
Turn clockwise.
Drain valve with lter
Turn anticlockwise.
<Lower part of the main Washlet unit>
Flat-blade
screwdriver
Dustcloth, etc.
(Water drainage plug)
Drain valve with lter
K837(Euro)InstructionManual̲EN.indb 25
2011/03/15 10:53:24