7
Introduction
Ef cient use
Save energy to protect the global environment.
Using the timer-based Energy Saver.
Close the lid.
Once set, the seat heater and the warm water heater
are turned off automatically everyday at the set time to
save energy. The duration of the Energy Saver can be
set to 6 or 9 hours. See page 17.
By closing the lid, less warmth escapes from the seat
surface, thus conserving energy.
Set the temperature lower.
Set the Operation ON/OFF button to “OFF”
when the Washlet will not be used for a long
time.
To conserve energy set the temperature just high
enough so that the seat does not feel cold.
See page 14.
When leaving the house for example, set the
button to “OFF” to conserve energy.
See page 11.
About the seating switch
When you sit on the seat, the seating switch turns on, enabling you to use
various functions.
* The seating switch may not turn on unless you sit on the seat fully, as
seen in the diagram below. (When a lightweight child uses the Washlet,
the seating switch may be difficult to turn on.)
A click sound is heard when the seating switch turns on.
Since the seat is designed to move up and down, a clearance is provided
between the seat cushion and the toilet.
The seating
switch is
built-in here.
The switch turns
on upon contact
with seat.
Clearance
The seat moves down.
Lights up.
In timer-based Energy Saver
K837(Euro)InstructionManual̲EN.indb 7
2011/03/15 10:53:15