14
Safety instructions
The solution is very safe, however, there are some points you should bear in mind.
Do not spray into your eyes, drink, and keep out of reach of children.
Use the right amount of water and salt - and only ordinary salt, not rock salt. Do not add more salt
as this device will automatically stop working to prevent damage. And make sure the salt is
dissolved before activating.
Only produce as much solution as is needed as it has a short shelf life and will revert to salty
water after seven days.
Use water temperature between 5°C and 35°C.
Do not use purified, ground or polluted water.
Do not keep the electrolysed water in a drinking bottle or keep it in the fridge in case it's mistaken
for drinking water.
After each activation make sure the device is allowed 3 minutes to cool down between uses,
otherwise the electronics and terminals may overheat.
Store the unit at room temperature or in a cool place, and remove any moisture within the device
if it’s stored for long periods of time.
Do not use any chemicals or detergents, separate the guard that protects the electrode or wipe
with excessive force. Do not disassemble the device.
