Toucan Eco Worktop operation guide
1 litre
1
2
6
Fill the jug with tap water to the 1 litre mark - it needs to be 1
litre to make the correct concentration. The water should be
between 5 to 35⁰C, and do not use purified water.
Place the jug on its base. The base will beep once and white
button remains lit. Activate the solution by pressing the button
once. The base light will flash and beep, the jug will light up blue
and bubbles appear as electrolysis begins.
Add 2g of table salt - that’s a flat measure using the measuring
spoon provided. No more or less as this affects the electrolysis.
If too much salt is added, rinse out the jug and start again. Do
not use rock salt.
After 5 minutes the base beeps, blue jug and white button lights
stay on, and solution stops bubbling. It’s now ready to use and
pour into the bottle. After 3 minutes you can activate again,
indicated by a beep and lights switching off. This prevents the
device from overheating.
6
5
