– 23 –
C
C
B
A
Paper roll core
Adjustment value according to the paper you are using
Paper Width
(µm)
Horizontal (standard) Layout
ø12 (A) inner diameter / ø18 (B) outer di-
ameter core roll paper
Vertical Layout or Wall-Mount
ø12 (A) inner diameter / ø18 (B) outer di-
ameter core roll paper
Detected diameter (C)
(mm)
Remaining paper
length (m)
Detected diameter (C)
(mm)
Remaining paper
length (m)
Level 1
Level 2
Level 1
Level 2
Level 1
Level 2
Level 1
Level 2
65
Approx.
ø23
Approx.
ø29
Approx.
2.5
Approx.
6.3
Approx.
ø23
Approx.
ø29
Approx.
2.5
Approx.
6.3
85
Approx.
ø23
Approx.
ø29
Approx.
1.9
Approx.
4.8
Approx.
ø23
Approx.
ø29
Approx.
1.9
Approx.
4.8
Notes:
1) The adjuster is factory-set at level 1.
2) The detected diameter and remained paper length given
in the table are calculated values, and there are some
variances depending on the rolled state of the paper,
the actual mechanism, or the printing pattern.
3) If thick paper is used (paper thickness between
80 µm and 85 µm), the paper roll may loosen and
cause variances in the detected values. Therefore,
setting the adjuster to Level 2 is recommended.
