VTouch 5-Wires Resistive Touchscreen User Manual
14
CUSTOMER:
DWG NO:
SCALE:NONE
DRAWN BY:ZENG
UNIT:mm
CHECKED BY;
ITEM NO:
PART NO:
REV:A
APPROVED BY:
•
Part 10. Integration Procedure
1. Connect controller with 5-wire resistive touch screen
2. Connect the controller to the motherboard via either USB port or
RS232 port
3. Connect the controller to 5VDC power (USB port can provide 5 VDC
Key board port or mouse port can provide 5VDC power for RS232
controller)
4. Install the appropriate touch system driver in correspondence with
operation system, (windows XP, 2K etc.)
•
Part 11. Install Touch system Driver
1. Available Touch system Driver
Drivers can be downloaded from V Touch Driver CD or website:
Windows 2000 (for both home version & professional version)
Windows XP (for both home version & professional version)
Windows 2003 Server
Windows Vista
Windows 2008 Server
Windows CE 5.0 & 6.0
Linux
2. Driver installation and Touch System calibration guide:
A. Preparation: connecting 5- wire resistive touch screen, controller and application
device or computer with correct cable on the integration procedure.
B. Insert the V Touch Driver CD in to application system;
C. Find the instruction to complete the driver installation for Windows 2000/XP as
following:
Double click at the setup.exe file to start software driver installation. Then, the setup
