5 of 6
6. Ensure that there is an adhesive reflector strip on the inside of the door and that it aligns with the two light pipes
when the door is closed.
Figure 7 Verifying the Reflective Strip
Testing the Installation
1. With the cabinet door and service tray still open, examine the state of the LEDs in the interior of the cabinet.
The LEDs should be illuminated.
2. Close the door of the cabinet and wait ten seconds.
3. From the rear of the cabinet (through the open service tray access), observe the state of the service lighting
LEDs.
The LEDS should be extinguished.
