7
Installing the Ovation Jukebox
This chapter explains how to install the Ovation jukebox, including setting up
its hardware, connecting it to a telephone line or broadband network as well
as attaching the power supply to the jukebox.
Installing the Ovation Jukebox
In this section, you install the Ovation wall bracket and jukebox, level it so it is stable and then
open its case.
Attach and level the wall bracket
Attach and level the wall bracket for the Ovation before hanging the unit.
To attach the wall bracket for the jukebox:
1. On the wall where the Ovation is to be installed, measure 65 inches (5’ 5”) from the floor and
mark this measurement.
This measurement identifies where the top of the bracket will be located on the wall.
2. Using the included template, mark the position for the wall bracket on the wall where you
intend to install the Ovation.
Caution:
The Ovation jukebox is heavy and represents a serious safety hazard if its
mounting system should fail. Installation of the mounting system should only be
performed by an experienced installer or licensed contractor who is familiar with standard
rigging, mounting and hanging practices as recognized by a licensed engineer or
government agency in your area.
Summary of Contents for Gem3 Ovation
Page 1: ......
Page 42: ...36 Activating the Jukebox...