30
Activating the Jukebox
To choose a dial-up connection:
Refer to the following figure when setting up your dial-up Internet connection.
Dial-up Connection Settings
1. Disable the
Wait For Dialtone
option if the location has a voice mail service installed on its
line.
When this option is disabled, the jukebox will not check for a dial tone before dialing out,
instead it will pause for two seconds then begin dialing.
2. Enable the
Dial 9 for external line option
if you need to dial 9 to access an external line, for
example, if a PBX is installed at the location.
3. Turn the
Tone Dialing
option off if the location uses pulse dialing.
4. If you need to dial an outgoing prefix before the phone number, touch the
Config
button for
Dialing prefix
, then use the numeric keypad to enter the prefix.
If the location has call waiting, you should enter the prefix to disable it. In most cases this is
*70
. You may need to add a pause to the end of this sequence, as sometimes there is a delay
before the dial tone returns. Use the
#
key to enter a pause. For example, the sequence
*70##
disables call waiting and then pauses twice before continuing to dial.
5. Touch the
Config
button associated with the
Main phone
field to specify the phone number
of your ISP. The jukebox will use number first to attempt communication with the TouchTunes
server.
Summary of Contents for Gem3 Ovation
Page 1: ......
Page 42: ...36 Activating the Jukebox...
