Setting up your Virtuo
Setting Up the Remote Control
Virtuo Installation and Setup Guide
81
Setting Up the Remote Control
The TouchTunes wireless remote control is a single-frequency remote that transmits a 433.92 MHz (FSK) signal.
The remote control is RF-based. This means you don’t need to point the remote directly at the SmartJuke when you
use it. It has a range of up to 200 feet depending on the obstructions between it and the SmartJuke. Concrete and
metal are more of a barrier than wood or plaster. The remote control can also be affected by interference from other
RF-based devices.
The remote control is powered by two 1.5V AAA batteries. Insert the batteries in the compartment on the back of the
remote. Use only high-quality alkaline batteries.
Use the mounting bracket to
install the remote control on
a wall for easy access.
Fasten the bracket to the
wall with two screws.
The red indicator LED flashes
when the remote transmits or
is being programmed.