Virtuo Installation and Setup Guide
Setting up your Virtuo
Enabling Bass Boost
90
Enabling Bass Boost
Virtuo’s computer boasts DSP technology for improved audio quality, equalization, and noise reduction. The Bass
Boost feature—individually controllable for all 3 audio zones—is, by default turned off in the SmartJuke software and
must be turned on through the Operator interface.
To enable Bass Boost
1.
From the main Operator interface, select the
Sound
menu, and then select
Zone 1 Out
.
2.
In the
Bass Boost
area, select
ON
.
You can repeat this procedure to turn on Bass Boost for all connected audio zones.
NOTE
If one of your audio zones is connected to an external sound system with hardware
equalization, “double equalizing” your audio signal using Bass Boost can yield
unsatisfactory results.
If your external sound package is the TouchTunes PerforMax Quad sound system,
which is equipped with an external EQ, turn Bass Boost off for best results.
Turn on Bass Boost
