Setting up your Virtuo
Adjusting Touch Screen Brightness and Contrast
Virtuo Installation and Setup Guide
97
Adjusting Touch Screen Brightness and Contrast
Virtuo is shipped from the factory with touch screen brightness and contrast settings configured to values that
TouchTunes has found to be suitable for most installations, and will probably not require adjustment. However,
optimum picture quality is affected by the lighting conditions in the venue for your Virtuo installation, so some
adjustment may be required to achieve the best results.
Virtuo’s touch screen is equipped with on-screen display (OSD) controls that let you change settings. Located on the
back of the monitor are four buttons.
OSD Control Buttons
To adjust the brightness and contrast
1.
Press the Menu button to display the OSD menu.
2.
Press the
UP
button or
DOWN
button to toggle and the
SELECT
button to select the OSD sub-menus and
functions.
3.
When the function you want to change, such as brightness or contrast is shown, press the
SELECT
button.
4.
To adjust the value of the function:
•
Press
UP
button to increase the value of an OSD control option.
•
Press the
DOWN
button to decrease the value of an OSD control option.
Button
Control
Function
1
MENU
Displays/exits the OSD menus.
2
UP
Selects OSD choice counterclockwise.
Increases the value of OSD adjustment choice
3
DOWN
Selects OSD choice clockwise.
Decreases the value of OSD adjustment choice
4
AUTO/
SELECT
Selects adjustment choices from the OSD menus.
1
4
2
3