10
TLGS625
ASSEMBL
Y INSTR
UCTIONS
Figure 6
DUST PORT
The dust port is located behind the sanding belt,
below the belt roller.
The operning is 1-1/2in.in diameter and can be
connected to a utility vacuum or a dust collector.
To connect the dust port to a dust collection
system:
1. Place a hose clamp over the dust hose.
2. Slide th hose over the dust port.
3. Secure the hose airtight with the hose clamp.
4. Check the hose with a light tug to ensure it is
secure.
Summary of Contents for TLGS625
Page 18: ...18 EXPLONED VIEW TLGS625...