The HDMI 4K Series Camera Help Manual
5 / 26
Insert the supplied SD card/USB flash disk (USB3.0 interface) into the HDMI camera SD card
slot/USB3.0 interface;
Connect the camera to the power adapter and switch it on;
Switch on the displayer and view the video in the
XCamView
software. Move the mouse to the left, top
or bottom of the
XCamView
UI, different control panel or UI will pop up and users could operate with the
mouse at ease.
7.2
Camera working in WLAN mode (AP mode)
The PC should be a WLAN enabled one.
For Windows user (Windows XP (32bit), Windows 7/8/10 (32/64 bit) ), please use
ToupView
.
For macOS and Linux user (macOS 10.10 or above or Linux distributions with kernel 2.6.27 or higher), please
use
ToupLite
. When connecting the camera with a mobile device, the free
ToupView App
is required. Just make
sure that the mobile device uses iOS 11 or higher/Android 5.1 or higher operating systems.