tousek
/ EN_REX-Force_01 / 25. 03. 2020
- 41 -
traffic light control STA 11
B
88 89
Bus Low
Bus High
control ST REX
Traffic light control board STA 11 in plastic housing IP 54
(210 x 310 x 125mm)
Technical data
Traffic light control board STA 11 in plastic housing IP 54 (210 x 310 x 125mm)
Power supply
230Va.c., +6/-10%, 50Hz
Relay load Red/Green traffic light
230V, max. 60W
Article no.
12120370
Optional equipment
induction loop detector ISD 6 (2-channels) • pluggable receiver
B
88 89
General
•
To implement traffic light function the control unit STA 11 has to be connected with the operator control unit ST REX via bus
system.
Valid for the traffic light mode:
• The inputs of the pulse buttons of the ST REX have no function and the impulse emission is only pos-
sible via traffic light board
page 44–46 (I-loops, pulse button, radio
)!
• When using a radio receiver in traffic light mode, the receiver is not to plugged into the slot
of the ST REX, but into the slot of the traffic light control!!
6. Optional Traffic light control unit STA 11
STA 11
• Connection possibility of two impulse switches or induc-
tion loops for Green request and two Red/Green traffic
lights 230V, 60W (inside and outside).
• Connection slots for optional radio receiver and induction
loop detector
•
Traffic light control board STA 11