- 8 -
tousek
/ EN_REX-Force_01 / 25. 03. 2020
Important
Note the following assembly criteria:
• Motor arm (2) and elbow (3) are assembled differently depending on the opening direction
(left/right, viewed from the inside).
• For a left-hand operator the elbow (3) musst be turned over.
• The motor arm must be placed on the operator at the correct angle in accordance with the
door situation and fixed with the Hexagon head bolts (2a) so that the planned installation
point of the gate console (5) can be implemented with the door closed in conjunction with
the door arm (4).
• Make sure there is enough room for movement so that neither the gate nor the motor arm
is restriced or collided during opening. Also plan the necessary space for safety edges.
These are used to protect dangerous areas and must be planned in such a way that they
can not be triggered by the gate or the motor arm.
• Set jumpers J1/2 (1-wing/2-wings) and JF (left-/right-operator) according to your door
situation
page 14, 15
Condition as delivered:
right operator
2
3
2a
View from below
DANGER:
The possible high gate weight or high speed can cause a very high
kinetic energy. The mechanical door construction and external limit stops for
the gate must be dimensioned accordingly!
2
3
Left
INSIDE
Right
2
3
8
8
adjustable
4
4
5
5
