Declaration of incorporation
In compliance with EC Machine Directive 2006/42/EC,
Annex II B for the installation of an incomplete machine.
We hereby declare that the following product, as well
as its version, put by us into circulation, complies with
the essential requirements of the Machinery Directive
(2006/42/EC), due to its design and type of construction.
The validity of this declaration will cease in case of any
unauthorized modifications to the products.
The product:
Sliding gate opener
TPS-10, -20, -20N, -20 PRO, -20 Master/Slave,
TPS 35 PRO, TPS 40 PRO, TPS 60 PRO, TPS 6speed,
TPS 10speed
is developed, designed and manufactured in accordance
with:
Machinery Directive 2006/42/EG
Low Voltage directive 2014/35/EU
Electromagnetic compatibility 2014/30/EU
Applied and used standards and specifications:
EN ISO 13849-1, PL-„c“, Cat 2
EN 60335-1 as applicable
EN 60335-2-103
EN 61000-6-3
EN 61000-6-2
Following requirements of Annex I of the EC Directive
2006/42/EC are met:
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.2, 1.2.3, 1.2.6, 1.3.2, 1.3.4,
1.3.7, 1.5.1, 1.5.4, 1.5.6, 1.5.8, 1.7
The relevant technical documentation is compiled in
accordance with Annex VII, Part B of the EC Machinery
Directive 2006/42/EC.
We undertake to submit it in electronic form and within a
reasonable time to the market surveillance authorities in
response to a duly substantiated request.
TOUSEK Ges.m.b.H., A1230 Wien, Zetschegasse 1,
Austria
is authorized to compile the technical documentation.
The incomplete machine cannot be put into service, until it
is determined that the machine, into which the incomplete
machine has to be inserted, complies with the the Machine
Directive 2006/42/EC.
Eduard Tousek, CEO Vienna, 20. 03. 2019
Motor number (Type plate):
Other components:
EC Declaration of Conformity
In compliance with EC Machine Directive 2006/42/EC,
Annex II, Part 1 A.
When the described operators are connected to a gate they
form a machine in the sense of the EC Machine Directive.
Relevant EU directives:
Construction Products Directive 89/106/EWG
Machinery Directive 2006/42/EG
Low Voltage directive 2014/35/EU
Electromagnetic compatibility 2014/30/EU
We hereby declare that the following product, in the version
put by us into circulation, complies with the essential requi-
rements of the Directives mentioned above. The validity
of this declaration will cease in case of any unauthorized
modifications to the products.
Product:
Gate description
Motor description
The incomplete machine cannot be put into service, until it
is determined that the machine, into which the incomplete
machine has to be inserted, complies with the the Machine
Directive 2006/42/EC.
Installation company
Address, ZIP code, Place
Date/ Signature
