S
WATER
1380
500
11,92
450 Watt
1.534,3 btu
M
WATER
1660
600
16,90
570 Watt
1.943,7 btu
L
WATER
1900
600
19,78
760 Watt
2.591,6 btu
(*) = calculated in WATT / BTU according to EN442.2 (
ΔT 50°C) norm / directives
For all models and product-sizes
COMMON FEATURES & EQUIPMENT:
every heat exchanger is equipped with 4 x 1/2" thread connection; the
mandatory INLET connection is marked with a RED arrow directly on the exchanger, while the OUTLET is marked
with a BLUE one. The remaining 2 connections are available for freely installation of 1/2" air-vent and blind plug (not
included).
The radiant panel can be installed either vertically or horizontally, as long as the flow and return connection
instructions are followed correctly (as also marked directly on the product).
RACCOMANDATION:
the manufacturer highly recommends that the water within the heating circuit is properly
treated through one or more appropriate filter device(s) in order to prevent limescale and similar deposits within
the heat-exchanger that might lead to the gradual loss of its heating-performance because of obstruction(s). We
kindly remind, that through limescale-deposits obstructed heat-exchangers are not
covered by the manufacturer's warranty as well as those installed by wrong inlet / outlet connections leading to
poor water-circulation
(max.) OPERATING PRESSURE:
4 bar
(max.) OPERATING TEMPERATURE:
95°C
HEAT-EXCHANGER WATER
CONTENT:
0,24 / 0,48 / 0,65 L (according to item-size = S / M / L)
(effective: October 2021)
MATERIAL
6 mm thick safety glass + Aluminum-Heat-
Exchanger on panel
’
s rear side
CONNECTION TYPE
4 x ½ “
Gas (internal thread)
No. OF WALL FIXING
POINTS
4 pcs.
PACKAGING
Cardboard box with inner protections
STANDARD
INCLUDED
EQUIPMENT
Fixing-Brackets-Set & Installation Manual
(ATTENTION: Valves, Blind Plug and Air-
Vent are NOT included)
>100
mm
41/49
mm
50/58
mm
