9
Spray Function:
•
Press the spray button at any time to spray water on clothes.
Note:
Ensure that there is enough water in the tank to use the spray function.
During first use, you may have to pump the spray button several times to start the
spraying function.
Using the steam jet:
1. This function provides an extra amount of steam to remove stubborn creases.
2. Turn the temperature control to the “MAX” position. The indicator light will
turn off when the required temperature is reached.
3. Press the steam jet button once.
4. Wait for a few seconds, then press the steam jet button again.
5. Most creases can be removed with three bursts of the steam jet.
Steam-ironing:
1. Ensure that there is enough water in the water tank.
2. Set the required temperature.
Caution!
Water may leak from the soleplate if too low of a temperature has
been selected.
3. Once the required temperature has been reached the power indicator light
will turn off.
4. Increase the steam output by pulling the steam button backwards, or decrease
it by pushing the steam button forward.
Ironing without steam:
1. Press the steam control button so that it is in the down position. Set a
temperature suitable for your fabric.
