Tower Hobbies NO GRAVITY, User Manual

Our model kits are subject to constant quality checks throughout the production process, and we sincerely 

hope that you are completely satisfied with the contents of your kit. However, we would ask you to check all 

the parts before you start construction, referring to the Parts List, as we cannot exchange components which 

you have already modified. If you find any part is not acceptable for any reason, we will readily correct or 

exchange it once we have examined the faulty component. Just send the offending part to our Model 

Department. Please be sure to include the enclosed complaint form, duly completed. We are constantly 

working on improving our models, and for this reason we must reserve the right to change the kit contents 

in terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. 

Please understand that we cannot entertain claims against us if the kit contents do not agree in every 

respect with the instructions and the illustrations.

Radio-controlled models, and especially model aircraft, are by no means playthings in the usual sense of the 

term. Building and operating them safely requires a certain level of technical competence and manual skill, 

together with discipline and a responsible attitude at the flying field. Errors and carelessness in building and 

flying the model can result in serious personal injury and damage to property. Since we, as manufacturers, 

have no control over the construction, maintenance and operation of our products, we are obliged to take 

this opportunity to point out these hazards and to emphasise your personal responsibility.

Speci

fi

cations

Steps of assembly

Choose a flying field

Center of gravity

Safety

1.Fuselage                                               1pc 

2.Wing                                                      1pc

3.Elevator                                                1pc 

4.Rudder                                                  1pc

5.Equipment canopy                              1pc 

6.Right wing fence                                  1pc

7.Left wing fence                                    1pc 

8.Spinner                                                 1pc 

9.Fuselage foam block                           1pc

10.Left part of landing gear                    1pc

11.Right part of landing gear                 1pc

12.Pull-pull fishing line                           1pc 

13.Vector system                                    1pc  

14.Motor mount                                       1pc

15.Aileron servo control horn            1pc

16.GWS HD 8040                                1pc

17.Screw (ST1.4*6 )                            14pcs

18.Adjustor                                           2pcs

19.O ring                                               2pcs

20.Spinner connecting part               1pc

21.Aileron push rod                             2pcs

22.Wing bracings #1                           2pcs

23.Elevator push rod                          1pc

24.Washers                                          2pcs

25.Vector system push rod                2pcs

26.Elevator bracings                          2pcs

27.Wing bracings #2                           2pcs

1. Matched with vector rotating system on rudder which increases the flexibility on rudder control. 

2. Good wind-resistance and stability, easy for control. 

3. EPO foam construction that is beaufiful, crash-resistant and easy for maintenance makes very 

    robust airframe.

4. A thoughtful equipment cabin design, all electronic equipments can be installed and safely 

    secured inside.

5. Simple design, 85% pre-assembled and super convenient assembly process keeps you far 

    away from the complicated traditional assembly process of indoor 3D plane and long time 

    waiting.

6. Professional airframe configuration and special airfoil design makes it a great lightweight 3D 

    airplane for a wide flight speed range.

7. No matter you’re professional 3D flyer or just starting out in 3D, we believe Sbach342 is a 

    good choice.

Battery

3S  400mAh 

20C Li-Po 

Motor

AT2206V2

KV 1500

ESC 

10A  

With BEC

8

NO GRAVITY  Specification

33.1 in (840 mm)

37.8 in (960 mm)

0.61 lb-0.65 lb (275g-295g)

Always be careful of propeller when plugging in the lipo battery and 

the lipo battery is installed !!!!

NO GRAVITY

NO GRAVITY