10.1.Pass aileron servo wires through corresponding servo house.
10.2.Fix servo arm on servo with screw.
10.3.Place aileron servo into correpsonding servo house, then fix with glue.
11.1.Pass elevator servo wires through corresponding servo house.
11.2.Fix servo arm on servo with screw.
11.3.Place elevator servo into correpsonding servo house, then fix with glue.
12.1.Pass rudder servo wires through corresponding servo house.
12.2.Fix servo arm on servo with screw.
12.3.Place rudder servo into correpsonding servo house, then fix with glue.
13.Install the aileron pushrod, one end connected to aileron control horn, another
end connected to servo arm. You can adjust the length of pushrod with clips on
the two ends.
NO GRAVITY
Summary of Contents for NO GRAVITY
Page 1: ......
Page 10: ...Motor 2206 Kv1500 Servo 8g micro servo ESC 10Amp Battery3S 400mAh 20C Li Po 17 18 NO GRAVITY ...
Page 11: ...NO GRAVITY ...
Page 12: ...NO GRAVITY ...