9
Accessories:
1. The vacuum cleaner comes complete with a bristle brush / crevice tool, ideal
for vacuuming upholstery and delicate surfaces.
2. To attach this accessory to the vacuum cleaner, push it into the main body of
the unit until it clicks into place.
3. To remove this accessory, pull the accessory firmly away from it until it
detaches.
Note:
Keep the brushes free of fibres, hairs, and other objects that could impede
proper functioning. Always remove them when it occurs.
Note:
This vacuum cleaner works best on smooth surfaces such as wood, ceramic,
tiles and marble. It will also perform well on hard, short-haired carpet. It should
NOT be used on long-haired carpets as the fibres will damage the system.
Problem
Possible Solution
The vacuum will not
work
The vacuum may have run out of charge. Charge fully.
This vacuum cleaner is equipped with a motor protective thermo-
stat. If for some reason your vacuum overheats, the thermostat will
automatically turn the suction motor off. Should this occur, allow
it to cool for 1 hour, then empty the dust container and clean all of
the filters.
The vacuum will
not pick-up or the
suction power is
weak
The dust container may be full, or the filters may require cleaning.
Empty the dust container and clean the filters.
Dust is escaping
from the vacuum
The filter may not be installed correctly, or the dust container may
be full. Empty the dust container and refit the filter.
6 - Troubleshooting
