Tower Hobbies T113002, Safety And Instruction Manual

10

Note:

 Use the handheld vacuum cleaner without the stick to vacuum small and 

hard-to-each areas, such as tables, furniture or car seats.

1.  If the handheld vacuum cleaner is placed in the stick, press the On/Off button 

on the stick to switch off the appliance before removing the handheld vacuum 

cleaner.

2.  Press the handheld stick release button, located at the top of the vacuum pole, 

and remove the handheld vacuum cleaner from the stick.

3.  Press and hold the On/Off button on the stick for at least 3 seconds to switch 

on the appliance. The LED indicators on the body of the unit will light up to 

indicate it is turned on.

4.  Press the speed control button  (labelled ‘MAX’) at the top of the unit to 

alternate between high and low speed, as required.

5.  After use, short-press the On/Off button to switch off the appliance.

Connecting the Accessories:

1.  The handheld vacuum cleaner comes complete with a 3-in-1 bristle brush, 

upholstery brush and crevice tool, ideal for vacuuming corners, narrow gaps, 

upholstery and delicate surfaces.

2.  To attach this accessory to the vacuum cleaner, push it into the main body of 

the unit until it clicks into place. 

3.  To remove this accessory, push the accessory release button, located at the 

bottom of the vacuum pole, and pull the accessory  firmly away from it until it 

detaches.

Note:

 This vacuum cleaner works best on smooth surfaces such as wood, ceramic, 

tiles and marble. It will also perform well on hard, short-haired carpet. It should NOT 

be used on long-haired carpets as the fibres will damage the system.