Tower Hobbies T113002, Safety And Instruction Manual

9

Assembly:

1.  Carefully unpack the vacuum cleaner. Ensure that all parts are included before 

discarding the packaging.

2.  Insert the vacuum cleaner handle into the vacuum pole, ensuring the two 

locking pins are correctly aligned. Push the two parts together until you hear 

them click into place.

3.  Connect the vacuum pole to the power brush, ensuring the two locking pins 

are correctly aligned. Push the two parts together until you hear them click 

into place.

4.  To detach the handle, push the button at the top of the pole and pull the 

upper part firmly away from the lower portion of the vacuum cleaner.

Note:

 Keep the brushes free of fibres, hairs, and other objects that could impede 

proper functioning. Always remove these types of objects when the brush picks 

them up.

Using the Stick Vacuum Cleaner:

Use the vacuum in stick mode to clean floors and carpets.

When using the stick, always make sure the dust compartment is attached to the 

handheld vacuum cleaner.

1.  Connect the handheld vacuum cleaner to the stick, ensuring it clicks into 

place. 

2.  Press and hold the On/Off button on the stick for at least 3 seconds to switch 

on the appliance. The LED indicators on the body of the unit will light up to 

indicate it is turned on.

3.  Press the speed control button  (labelled ‘MAX’) at the top of the unit to 

alternate between high and low speed, as required.

4.  After use, short-press the On/Off button to switch off the appliance.

Fig. 3

Fig. 4