Tower Hobbies T12039, Safety And Instruction Manual

8

1.  Remove your appliance from the packaging.

2.  Before using the unit for the first time, carefully clean the attachments and 

bowl.

3.  Ensure that the unit is at the 0 setting, and then plug it into the power source.

4.  Your appliance is now ready for normal use.

5.  Dispose of the packaging in a responsible manner.

Using the Unit as a Hand Mixer:

1.  This unit may be used as a handheld or stand mixer, as required. To detach 

the handheld unit when it is attached to the stand base, press the handheld 

release button at the back of the unit and pull the handheld firmly upwards 

and away from the main base until it detaches.

2.  To use the unit as a hand mixer, begin by attaching the dough hooks or mixing 

beaters to the handheld unit.

3.  To attach the dough hooks or beaters to the unit, insert each of them into one 

of the corresponding slots on the underside of the unit until it clicks into place. 

Ensure each accessory is securely attached before attempting to use the unit.

4.  Once the accessories are correctly installed and secured into place, place the 

ingredients to be mixed into the mixing bowl and position the handheld mixer 

over the lip of the bowl. 

5.  Once the mixer is correctly positioned, flick the speed selection switch to any 

position other than ‘0’ to begin mixing. Flick this switch to any of the other 

available settings while the unit is in operation to change speed settings while 

mixing, or flick it back to the ‘0’ position at any time to turn the unit off and 

stop the mixing process.

6.  To release an attachment from the unit at any time, simply press the ‘Release’ 

button at the top of the handheld unit. The attachment will automatically 

detach from the handheld unit.

CAUTION!

 Always make sure the speed selection dial is turned to the ‘0’ poisition 

before attempting to release the attachments from the unit.

Attaching the Handheld Unit to the Base:

1.  This unit may be used as a handheld or stand mixer, as required.

2.  To use the unit as a stand mixer, begin by attaching the accessories to the 

handheld unit, as described in the section above. Ensure each accessory is 

securely attached before attempting to use the unit.

3.  Once the accessories are correctly installed and secured into place, attach 

the unit to the stand base. To do this, simply slot the handheld into the 

corresponding grooved section at the top of the stand base, ensuring the 

protruding tab on the base lines up with the corresponding notch on the 

underside of the handheld unit. If these two parts are correctly aligned, the tab 

will automatically slot into the notch and secure the handheld unit to the base.

4 - Before First Use

5 - Using Your Appliance