6
Before First Use:
Read all instructions and safety information carefully before first use. Please retain this
information for future reference.
1.
Remove your appliance from the packaging.
2.
Check that there is no damage to the cord or any visible damage to the body.
3.
Dispose of the packaging in a responsible manner.
4. Remove any stickers or labels from the appliance
5.
Thoroughly clean the drawer with hot water, some washing-up liquid and a non-
abrasive sponge.
6.
Wipe the inside and outside of the appliance with a moist cloth.
7.
Do not fill the drawer with oil or frying fat. This is an oil-free fryer that works on hot air.
Note:
This appliance uses very little oil or no oil.
Using Your Appliance.
Preparing For Use:
1.
Place the appliance on a stable, horizontal and even surface. Do not place the
appliance onto a non-heat-resistant surface.
2.
Do not fill the drawer with oil or any other liquid.
3.
Do not put anything on top of the appliance, as this will disrupt the airflow and the
hot air frying will be affected as a result.
Automatic Switch Off:
The Tower Air Fryer has a built in timer, which will automatically shut down the air fryer
when timer reaches zero.
You can manually switch off the air fryer by turning the timer dial anti-clockwise to zero.
The air fryer will then automatically switch off within 20 seconds.
Air Fryer Drawer Safety Switch:
For your safety, this air fryer contains a safety switch in the drawer, designed to keep it
from accidentally turning on whenever the drawer is not properly situated inside the
appliance or the timer is not set. Before using your air fryer, please ensure that the drawer
is fully closed and that the cooking timer has been set.
Removing the Drawer:
The drawer can be removed fully from the air fryer. Pull on the handle to slide the drawer
out of the air fryer.
Note:
If the drawer is removed from the main body of the fryer when in operation, the unit
will automatically stop working within 5 seconds of this occurring.
Air Frying:
1.
Connect the mains plug into an earthed wall socket.
2.
Carefully pull the drawer out of the air fryer.
3.
Put the food in the drawer.
4. Slide the drawer back into the air fryer making sure to carefully align with the guides
in the body of the fryer.
CAUTION:
Do not touch the drawer immediately after use, as it gets very hot. Allow it
plenty of time to cool. Only hold the drawer by the handle.
5.
Determine the required cooking time for your desired food (refer to the ‘Settings’
section).
6.
To switch on the appliance, turn the timer dial to the required cooking time. The fan
will start working and both pilot lights on the body of the fryer will come on to show
the unit is in operation.
7.
Turn the temperature control dial to the required temperature. Refer to the ‘Settings’
section in this chapter to learn how to determine the right temperature. Add 2
minutes to the cooking time when the appliance is cold.
Note:
If you wish, you can also let the appliance preheat without any food inside. In this
case, turn the timer dial to more than 2 minutes and wait until the heating-up light goes
out. Then, add food to the drawer and turn the timer dial to the required cooking time.
8.
The timer starts counting down the set cooking time.
