8
Register online at www.towerhousewares.co.uk for your
FREE
extended guarantee.
3 USING YOUR APPLIANCE
Before first use:
1. Remove all packaging materials including
those that may be inside the toasting slots
or toasting lever slots.
2. Wipe the exterior with a damp cloth. Dry
thoroughly. Do not use abrasive cleaners.
3. Do not put the Toaster, cord or plug in
water.
4. Be sure crumb tray is pushed all the way
into the back of the toaster and the toasting
levers are in the UP position.
5. Unwrap power cord from cord storage area
on underside of toaster and plug into a 220-
240V AC outlet.
6. Turn the browning selector knob to, the
lightest setting.
7. Lower the toasting lever until they lock in
place. Operate without bread once or twice
to burn off any manufacturing residue.
You may notice a light amount of smoke;
this is normal and will stop as the heating
elements continue to heat.
Automatic centring guides:
Lowering the toasting lever closes the centring
guides and holds the bread or toaster food
centrally in the toasting slots.
Note:
The toasting lever will not lock down
unless the toaster is plugged into an electrical
outlet.
Toasting Instructions:
1. Make sure crumb trays are pushed all the
way into the back of the Toaster and the
toasting levers are in the UP position.
2. Make sure no bread or other objects are
inside the toasting slots.
3. Place Toaster on a flat, level, heat resistant
surface.
4. Plug the power cord into a 220-240AC
electrical outlet.
5. Position the browning selector knob to
desired setting(s). To test toasting times for
browning, it is best to use both toasting
slots’ position the browning selector
knob between (3) and (4) medium; then
adjust each subsequent toasting to your
preference.
6. Remove all protective wrappings from food
before placing into the toasting slot(s).
7. Insert bread or toaster food into the toasting
slot(s).
8. Lower the toasting lever until locked into
place. The automatic centring guides
hold food upright for uniform side-to-side
toasting. When the bread is lowered into
position, toasting will begin.
9. To use the bun warmer, make sure that the
toaster is cool and lift the bun warmer rack
up until they click in place.
10. Place the bun onto the bun warmer rack
and select your desired browning setting.
11. When the toast reaches the selected
browning level, it will pop up automatically.
12. 10. Remove bread from toasting slot(s). Use
care when removing bread as the bread
and the top of the toaster will still be hot.
13. If your toast jams, unplug the cord and
move the loading lever up and down a few
times to raise jammed bread.
14. To interrupt toasting, press the
corresponding CANCEL button.
15. Unplug cord from wall outlet when not in
use.
