8
1. Remove all packaging materials including those that may be inside the toasting slots
or toasting lever slots.
2. Wipe the exterior with a damp cloth. Dry thoroughly. Do not use abrasive cleaners.
3. Do not put the Toaster, cord or plug in water.
4. Be sure crumb tray is pushed all the way into the back of the toaster and the toasting
levers are in the UP position.
5. Unwrap power cord from cord storage area on underside of toaster and plug into
a 220-240V AC outlet.
6. Turn the browning selector knob to the lightest setting.
7. Lower the toasting lever until they lock in place. Operate without bread once or twice
to burn off any manufacturing residue. You may notice a light amount of smoke;
this is normal and will stop as the heating elements continue to heat.
NOTE:
The toasting lever will not lock down unless the toaster is plugged into an electrical
outlet.
Toasting Bread
1. Ensure the crumb tray is pushed all the way into the back of the toaster and the toasting
levers are in the UP position.
2. Make sure no bread or other objects are inside the toasting slots.
3. Place the toaster on a flat, level, heat resistant surface.
4. Plug the power cord in to a mains outlet.
5. Turn the browning selector dial to desired setting. To test the toasting times for browning,
it is best to turn the browning selector dial between 3 and 4, and then adjust each
subsequent toasting to your preference. (see the browning guide).
6. Remove all protective wrappings from food before placing into the toasting slots.
7. Insert bread or toaster food into the toasting slots.
8. Lower the carriage lever until locked into place. When the bread is lowered into position,
toasting will begin.
9. When the toast reaches the selected browning level, it will pop up automatically.
10. Remove the toast from the toasting slot. Use care when removing bread as the bread and
the top of the toaster will still be hot.
11. If your toast jams, unplug the cord and move the loading lever up and down a few times
to raise jammed toast.
12. To interrupt toasting, press the
CANCEL
button.
13. Unplug the cord from mains outlet when not in use.
4 - Before First Use
5 - Using Your Appliance