Tower Hobbies UPROAR, Instruction Manual

3

You can also contact the national Academy of Model 

Aeronautics (AMA), which has more than 2,300 chartered 
clubs across the country. Through any one of them, instructor 
training programs and insured newcomer training are 
available.

Contact the AMA at the address or

toll-free phone number below:

Academy of Model Aeronautics

5151 East Memorial Drive

Muncie, IN 47302-9252

TEL: (800) 435-9262

FAX: (317) 741-0057

Congratulations!
 

If you have been looking for a way to put the

 FUN

 back 

into your Sunday flying, you have just found it with the 

Uproar

. The Uproar is a nimble little

 hot-dogger

 that assembles 

fast and is easy on the budget. The Uproar does not require 
any special building or flying skill – just traditional building 
methods and a little tail-dragger time.
 

With its oversized control surfaces it turns, loops and 

rolls in the blink of an eye. But the thick airfoil and light wing 
loading allow the plane to slow 

way

 down for gentle spot 

landings. If equipped with an engine like the Tower .40, it’s 
possible to be airborne in a matter of feet, zip through three 
rolls, and loop back for a landing before most of your buddies 
are off the ground. What more can we say? The Uproar is the 
most flying fun you can buy regardless of the cost.

ITEMS REQUIRED FOR COMPLETION

HARDWARE:

We

recommend using 

Great Planes

®

, Hobbico

®

 and 

Tower brand

 accessories for your modeling needs.

❍

 4-Channel radio with 5 servos and a Y-harness

❍

 .32 - .55 2-Stroke / .40 - .56 4-Stroke

❍

 Engine mount – GPMG1041

❍

 (4) 4-40 x 1" Machine screws / blind nuts – GPMQ3544

❍

 (4) Faslink Pushrod Connectors (optional) – GPMQ3820

❍

 4 - 8 oz. Fuel tank – DUBQ0204, 0206, 0208

❍

 (2) 2-1/2" Wheels – DUBQ0875

❍

 (4) 5/32" Wheel collars – GPMQ4306

❍

 1" Tail wheel – GPMQ4241

❍

 (2) 3/32" Wheel collars – GPMQ4302

❍

 12" Medium fuel tubing – GPMQ4131

❍

 (2) Rolls covering film – TowerKote Film

❍

 (16) Hinges – GPMQ3950

❍

 24" Flexible pushrod cable and tube (throttle) – GPMQ3700

❍

 (2) Screw-Lock Pushrod Connectors – GPMQ3870

SUPPLIES

❍

 2 oz. Thin CA – TOWR3800 

❍

 Masking Tape

❍

 2 oz. Medium CA – TOWR3801 

❍

 Waxed paper

❍

 2 oz. Thick CA – TOWR3802 

❍

 Clothespins

❍

 6-minute epoxy – TOWR3806 

❍

 Isopropyl Rubbing

❍

 30-minute epoxy – TOWR3810 

  Alcohol (70%)

❍

 Balsa filler – HCAR3401