4
KIT INSPECTION
Before starting to build, take an inventory of this kit to make sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not of acceptable quality, or if you need assistance with assembly,
contact Product Support. When reporting defective or missing parts, use the part names exactly as they are written in
the Kit Contents list on this page.
TOWER HOBBIES PRODUCT SUPPORT
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Telephone: (217) 398-8970, ext. 5
Fax: (217) 398-7721
E-mail: airsupport@towerhobbies.com
Kit Contents
1.
Fuselage
2
Wing Dowels (2)
3.
Wire Pushrods (2)
4.
Aluminum/Wood Wing Joiner
5.
Servo Rails (2)
6.
Tri-Stock Vertical Stabilizer Braces (2)
7.
Vertical Stabilizer (Fin) w/Rudder
8.
Left Wing Panel
9.
Right Wing Panel
10. Horizontal Stabilizer (Stab) w/Elevator
Kit Contents (not photographed)
Bag 1
(2)
4" [100mm] Velcro Strips
(1)
1/8" x 3/8" x 8" [3 x 9.5 x 200mm] Balsa Stick
(1)
Small Rubber Band
Bag 2
(2)
Control Horns
(2)
Clevises
(2)
90° Pushrod Connectors
(1)
Tail Skid
(2)
Clevis Retainers
(1)
1.5mm Hex Wrench
(4)
2 x 10mm Screws
1
10
9
8
To convert inches to millimeters, multiply inches by 25.4
2
3
4
5
6
7
